Product Home / Product 
Application :
Backpart moulding and re-shaping of backpart & top line.
Characteristic:
1. High output & efficiency can
be obtained from two cold & hot mould sets.
2. The temperature of both the inner and outer part of the hot mould can be
adjusted individually to be suitable for upper of different kind material and
the heating request of lining upper.
3. After pre-moulding, the counter, upper and lining will be adhered &
flatten to decrease the happen of reject.
4. Purposed slant design of machine is easy and convenient to be operated.
5. The loose & tight adjustment of upper by clipper can be setted to openly
or not for different kind of shoes.
6. Custom-made last mould offers the highest accuracy.
7. The reject can be re-shaped to get perfect top line and non wrinkle happened
by the special inverse moulds.
8. High power cooling system for environment protect purpose it can get the
best effect of moulding. (vaporizer temperature -20°C down after running 10
minutes)
Specification:
Dimension(mm) |
1130 x 900 x 1600 |
Air pressure |
5-6 kg/cm² |
Voltage |
220V, 1ø:50 / 60HZ |
Capacity |
1400-2000 Pairs/8hrs |
Power Consumption |
2.5KW |
N.W / G.W |
280kg / 380kg |